• Fully robotic blister unit dose
• Automatically cuts the blisterpack
• Print barcodes, alerts and advices
From Blister Cut to Print
Select cutting parameters in the operator interface screen before cutting and printing and , avoiding all possibilities of wrong identification.
• Synchronize with HIS through our exclusive Opus 5.0 Software. Includes 100+ minibula instructions and alerts with drawings for 2000+ medicines.
• All mechanism is enclosed giving very low noise in the room.
• Produce easy tear off strips of «n» units for tidy stock organization.
• Prints additional color on the package for medicine class identification.
• Production rate 1.500 to 2.200 cuts and unit-dose per hour.
Cutting System:
• Minimum distance required between bubbles is 2.5 mm
• Distance from the edge to bubble should be between 5 and 15 mm
• Orientation to 45 degrees is possible
• Alternate position of pills is not a problem
• Also cuts blister with aluminium foil in both sides
• Magazine capacity is up 500 mm and depending on blister thickness up to 150 units to cut before reloading
• Ask our Technical Department for a more thorough configuration checking
• This system usually cuts more than 90% of the required cuts in the hospital